julio 22, 2026
Spindle length: 125mm. Dating from the early 1990's. Threading / type: Italian.
julio 22, 2026
SHIMANO BOTTOM BRACKET. ITALIAN Threaded. Check pics.
julio 22, 2026
The bottom bracket comes with two sealed bearings; however, 3 of the 4 bearing shields are missing. This set does not include the inner plastic spacer found in complete bottom bracket sets. The lockrings are also seized on the outer bottom bracket cups. This item is being sold as-is for parts or repair.
julio 22, 2026
Shimano BB-5500 Octalink V1 Bottom Brackets. Fits Shimano Octalink V1 Spline Cranksets FC-7700/FC-7703/FC-6500/FC-6503/FC-5500/FC-5501/FC-5503/FC-5504 cranks. Spindle Interface Type: Shimano Octalink V1.
julio 22, 2026
Used in very nice shape. No rust or pitting on the bearing surfaces. Each cup has a rubber seal at the center hole.
julio 22, 2026
julio 22, 2026
Spindle Type: Square Taper. Bottom Bracket Shell Type: ITA (Italian). Model: Record. Minimal use, bearings spin butter smooth.
julio 22, 2026
Campagnolo Record Ultra Torque Bottom Bracket Cup Set (NO Wavy Washer or Safety Clip)Italian Threaded 36 mm x 24 TPI. Not for English threaded or pressfit frames.For the Ultra Torque system. Works with any level Ultra Torque crank from Centaur on up to Super RecordThese are just cups. NO wavy washer. NO safety clip. These parts were pilfered from this BB. Ideal buyer is switching from an English threaded frame to an Italian threaded frame and just needs the cups and can reuse their clip/washer.No bearings. On the Ultra Torque system the bearings are part of the crank. NEW/NOS in open bag
julio 22, 2026
This is a used, complete Ofmega Italian threaded bottom bracket 36x34F for 70mm bottom bracket shell. It's from the early 1980s. The axle has light wear as does the races of the fixed cup. The adjutable has some discoloration on the races. The exterior faces ilof the cups have some oxidation. The lock ring, dust cover, bearings and nuts/bolts are very nice.
julio 22, 2026
julio 22, 2026
The Syncros Bottom Bracket 70mm ITA 36x24 127mm Italian Hammer includes two end caps, two lockrings, and two sealed bearings. The bearings spin smoothly and are in good condition. All components thread together properly and can be easily disassembled. The only missing part is the center plastic spacer, which is typically included with complete sets and usually features the Hammer branding.
julio 22, 2026
New! Ceramicspeed Italian Threaded Bottom Bracket for 30mm Spindles 101331. Condition is New. Shipped with USPS Ground Advantage.
Prev page
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238
Next page