julio 22, 2026
Complete and removed in working condition--has not been degreased. Crown race is slightly bent on edges--did not affect bearing function.
julio 22, 2026
Crankarm shows light wear, scratches, and marks consistent with prior use. Taper and threads are in good condition. • Genuine Campagnolo Record Italy crankarm. • Compatible with Campagnolo 135 BCD double chainrings.
julio 22, 2026
Shimano Dura Ace HP-7410 NJS-certified headset.For 1 inch threaded forks available in standard JIS or ITA size.Featuring lightweight aluminum construction, with wonderfully smooth cartridge sealed-bearings. Classic styling with modern functionality. For deciding your size, you need to either check your current headset with a measuring tool suchas digital calipers/micrometer, or you can measure the internal diamter of your headtube of your frame, withdigital calipers, and also the fork bearing race section of your fork. If you head tube is closer to 30.2mm and fork closer to 26.4mm then please select the Italian size.If your head tube is closer to 30mm, and fork closer to 27mm, then please select the JIS size.The HP-7410 is NJS-approved for use in pro keirin racing in Japan, but are also well suited to road bikes.Stack height is 37.6mm including top and bottom head parts. (Please note that the ITALIAN set is oddly marked by shimano as 'ENGLISH', so please do not be alarmed if you order an ITALIAN size headsetand the box you receive has 'ENGLISH' printed on the size. This is normal.)
julio 22, 2026
The sealed bearings on this hub are included, along with both side caps and lock rings. A Plastic Hammer–branded spacer is also included.
julio 22, 2026
The bottom bracket comes with two sealed bearings; however, 3 of the 4 bearing shields are missing. This set does not include the inner plastic spacer found in complete bottom bracket sets. The lockrings are also seized on the outer bottom bracket cups. This item is being sold as-is for parts or repair.
julio 22, 2026
Shimano BB-5500 Octalink V1 Bottom Brackets. Fits Shimano Octalink V1 Spline Cranksets FC-7700/FC-7703/FC-6500/FC-6503/FC-5500/FC-5501/FC-5503/FC-5504 cranks. Spindle Interface Type: Shimano Octalink V1.
julio 22, 2026
Used in very nice shape. No rust or pitting on the bearing surfaces. Each cup has a rubber seal at the center hole.
julio 22, 2026
It has been rebuilt with new grease and new balls. Hub has minor scuffing/pitting on flange. This is still a usable hub.
julio 22, 2026
The FSA Alloy Cup JIS bottom bracket is suitable for Italian threaded interfaces. Spindle Interface Type: Square Taper JIS. FSA (Full Speed Ahead). Bottom Bracket Shell I.D.: 36. BB Shell Width (mm): 70.
julio 22, 2026
Campagnolo Record Ultra Torque Bottom Bracket Cup Set (NO Wavy Washer or Safety Clip)Italian Threaded 36 mm x 24 TPI. Not for English threaded or pressfit frames.For the Ultra Torque system. Works with any level Ultra Torque crank from Centaur on up to Super RecordThese are just cups. NO wavy washer. NO safety clip. These parts were pilfered from this BB. Ideal buyer is switching from an English threaded frame to an Italian threaded frame and just needs the cups and can reuse their clip/washer.No bearings. On the Ultra Torque system the bearings are part of the crank. NEW/NOS in open bag
julio 22, 2026
julio 22, 2026
Box shows visible shelf wear, creasing and discoloration from age. No missing parts or cracks noted.