julio 30, 2026
✔ Himiway Cruiser. ✔ Himiway Step Thru. ✔ Lectric XP, 1,0, 2.0, and 3.0 models. ✔ Lectric XP Step-Thru, 1,0, 2.0, and 3.0 models. ✔ Lectric XP Lite. ✔ Lectric XPremium. ✔ Lectric XP Trike. ✔ Lectric XPedition.
julio 30, 2026
✔ Himiway Cruiser. ✔ Himiway Step Thru. ✔ Lectric XP, 1,0, 2.0, and 3.0 models. ✔ Lectric XP Step-Thru, 1,0, 2.0, and 3.0 models. ✔ Lectric XP Lite. ✔ Lectric XPremium. ✔ Lectric XP Trike. ✔ Lectric XPedition.
julio 30, 2026
Are you tired of your charger falling off your table while in use? Do you worry about accidentally damaging it by having it on the floor? Keep it safe and protected by hanging it on your wall today! This product is designed to securely hold the D-POWER Battery Charger (Model DPLC110V55), with the following dimensions:📐 Length: 3.365 in.📐 Width: 1.85 in.📐 Height: 6.5 in. ❗️❗️❗️ There is more than one type of D-POWER charger with the same Model Number. One says D-POWER on the front of the charger with white letters, the other one is not labeled at all on the front and is bigger. This wall mount is for the charger NOT labeled in the front with white letters, with the size dimensions listed above.❗️❗️❗️ Please ensure that your charger matches this model number and looks similar to the charger in the photos, as compatibility cannot be guaranteed for other chargers. This should fit the D-POWER battery chargers for the following eBike brands and models:✔ Lectric XP, 1,0, 2.0, and 3.0 models✔ Lectric XP Step-Thru, 1,0, 2.0, and 3.0 models✔ Lectric XP Lite✔ Lectric XPremium✔ Lectric XP Trike✔ Lectric XPedition✔ Any eBike or battery that uses the D-POWER (UNLABELED in the front, with the dimensions listed above) (Model DPLC110V55) charger. FEATURES: ► Cutout for the charging status light, allowing you to easily check the charging status.► Holders for the power and charging cables, to keep them off the floor and protected.► Easy insertion and removal of the battery charger itself, perfect for those who frequently take the charger on the go!► Easy installation, with three mounting holes to mount the holder to either wood or drywall. Designed for #8 flathead screws, you can use either flathead wood screws, or flathead drywall screws with anchors. SCREWS NOT INCLUDED, but readily available at any hardware store (Ace, Home Depot, Lowes, etc.).► Made with durable, heat, and UV resistant PETG plastic. ⚠️⚠️⚠️ PLEASE NOTE: BATTERY CHARGER NOT INCLUDED! This is the wall mount only. ⚠️⚠️⚠️ 📬FREE DOMESTIC SHIPPING WITHIN THE USA!📬 Thank you for viewing my listing! 😊
julio 30, 2026
Are you tired of your charger falling off your table while in use? Do you worry about accidentally damaging it by having it on the floor? Keep it safe and protected by hanging it on your wall today! This product is designed to securely hold the D-POWER Battery Charger (Model DPLC110V55), with the following dimensions:📐 Length: 3.365 in.📐 Width: 1.85 in.📐 Height: 6.5 in. ❗️❗️❗️ There is more than one type of D-POWER charger with the same Model Number. One says D-POWER on the front of the charger with white letters, the other one is not labeled at all on the front and is bigger. This wall mount is for the charger NOT labeled in the front with white letters, with the size dimensions listed above.❗️❗️❗️ Please ensure that your charger matches this model number and looks similar to the charger in the photos, as compatibility cannot be guaranteed for other chargers. This should fit the D-POWER battery chargers for the following eBike brands and models:✔ Lectric XP, 1,0, 2.0, and 3.0 models✔ Lectric XP Step-Thru, 1,0, 2.0, and 3.0 models✔ Lectric XP Lite✔ Lectric XPremium✔ Lectric XP Trike✔ Lectric XPedition✔ Any eBike or battery that uses the D-POWER (UNLABELED in the front, with the dimensions listed above) (Model DPLC110V55) charger. FEATURES: ► Cutout for the charging status light, allowing you to easily check the charging status.► Holders for the power and charging cables, to keep them off the floor and protected.► Easy insertion and removal of the battery charger itself, perfect for those who frequently take the charger on the go!► Easy installation, with three mounting holes to mount the holder to either wood or drywall. Designed for #8 flathead screws, you can use either flathead wood screws, or flathead drywall screws with anchors. SCREWS NOT INCLUDED, but readily available at any hardware store (Ace, Home Depot, Lowes, etc.).► Made with durable, heat, and UV resistant PETG plastic. ⚠️⚠️⚠️ PLEASE NOTE: BATTERY CHARGER NOT INCLUDED! This is the wall mount only. ⚠️⚠️⚠️ 📬FREE DOMESTIC SHIPPING WITHIN THE USA!📬 Thank you for viewing my listing! 😊
julio 30, 2026
Are you tired of your charger falling off your table while in use? Do you worry about accidentally damaging it by having it on the floor? Keep it safe and protected by hanging it on your wall today! This product is designed to securely hold the D-POWER Battery Charger (Model DPLC110V55), with the following dimensions:📐 Length: 3.365 in.📐 Width: 1.85 in.📐 Height: 6.5 in. ❗️❗️❗️ There is more than one type of D-POWER charger with the same Model Number. One says D-POWER on the front of the charger with white letters, the other one is not labeled at all on the front and is bigger. This wall mount is for the charger NOT labeled in the front with white letters, with the size dimensions listed above.❗️❗️❗️ Please ensure that your charger matches this model number and looks similar to the charger in the photos, as compatibility cannot be guaranteed for other chargers. This should fit the D-POWER battery chargers for the following eBike brands and models:✔ Lectric XP, 1,0, 2.0, and 3.0 models✔ Lectric XP Step-Thru, 1,0, 2.0, and 3.0 models✔ Lectric XP Lite✔ Lectric XPremium✔ Lectric XP Trike✔ Lectric XPedition✔ Any eBike or battery that uses the D-POWER (UNLABELED in the front, with the dimensions listed above) (Model DPLC110V55) charger. FEATURES: ► Cutout for the charging status light, allowing you to easily check the charging status.► Holders for the power and charging cables, to keep them off the floor and protected.► Easy insertion and removal of the battery charger itself, perfect for those who frequently take the charger on the go!► Easy installation, with three mounting holes to mount the holder to either wood or drywall. Designed for #8 flathead screws, you can use either flathead wood screws, or flathead drywall screws with anchors. SCREWS NOT INCLUDED, but readily available at any hardware store (Ace, Home Depot, Lowes, etc.).► Made with durable, heat, and UV resistant PETG plastic. ⚠️⚠️⚠️ PLEASE NOTE: BATTERY CHARGER NOT INCLUDED! This is the wall mount only. ⚠️⚠️⚠️ 📬FREE DOMESTIC SHIPPING WITHIN THE USA!📬 Thank you for viewing my listing! 😊
julio 30, 2026
Are you tired of your charger falling off your table while in use? Do you worry about accidentally damaging it by having it on the floor? Keep it safe and protected by hanging it on your wall today! This product is designed to securely hold the D-POWER Battery Charger (Model DPLC110V55), with the following dimensions:📐 Length: 3.365 in.📐 Width: 1.85 in.📐 Height: 6.5 in. ❗️❗️❗️ There is more than one type of D-POWER charger with the same Model Number. One says D-POWER on the front of the charger with white letters, the other one is not labeled at all on the front and is bigger. This wall mount is for the charger NOT labeled in the front with white letters, with the size dimensions listed above.❗️❗️❗️ Please ensure that your charger matches this model number and looks similar to the charger in the photos, as compatibility cannot be guaranteed for other chargers. This should fit the D-POWER battery chargers for the following eBike brands and models:✔ Lectric XP, 1,0, 2.0, and 3.0 models✔ Lectric XP Step-Thru, 1,0, 2.0, and 3.0 models✔ Lectric XP Lite✔ Lectric XPremium✔ Lectric XP Trike✔ Lectric XPedition✔ Any eBike or battery that uses the D-POWER (UNLABELED in the front, with the dimensions listed above) (Model DPLC110V55) charger. FEATURES: ► Cutout for the charging status light, allowing you to easily check the charging status.► Holders for the power and charging cables, to keep them off the floor and protected.► Easy insertion and removal of the battery charger itself, perfect for those who frequently take the charger on the go!► Easy installation, with three mounting holes to mount the holder to either wood or drywall. Designed for #8 flathead screws, you can use either flathead wood screws, or flathead drywall screws with anchors. SCREWS NOT INCLUDED, but readily available at any hardware store (Ace, Home Depot, Lowes, etc.).► Made with durable, heat, and UV resistant PETG plastic. ⚠️⚠️⚠️ PLEASE NOTE: BATTERY CHARGER NOT INCLUDED! This is the wall mount only. ⚠️⚠️⚠️ 📬FREE DOMESTIC SHIPPING WITHIN THE USA!📬 Thank you for viewing my listing! 😊
julio 30, 2026
Are you tired of your charger falling off your table while in use? Do you worry about accidentally damaging it by having it on the floor? Keep it safe and protected by hanging it on your wall today! This product is designed to securely hold the D-POWER Battery Charger (Model DPLC110V55), with the following dimensions:📐 Length: 3.365 in.📐 Width: 1.85 in.📐 Height: 6.5 in. ❗️❗️❗️ There is more than one type of D-POWER charger with the same Model Number. One says D-POWER on the front of the charger with white letters, the other one is not labeled at all on the front and is bigger. This wall mount is for the charger NOT labeled in the front with white letters, with the size dimensions listed above.❗️❗️❗️ Please ensure that your charger matches this model number and looks similar to the charger in the photos, as compatibility cannot be guaranteed for other chargers. This should fit the D-POWER battery chargers for the following eBike brands and models:✔ Lectric XP, 1,0, 2.0, and 3.0 models✔ Lectric XP Step-Thru, 1,0, 2.0, and 3.0 models✔ Lectric XP Lite✔ Lectric XPremium✔ Lectric XP Trike✔ Lectric XPedition✔ Any eBike or battery that uses the D-POWER (UNLABELED in the front, with the dimensions listed above) (Model DPLC110V55) charger. FEATURES: ► Cutout for the charging status light, allowing you to easily check the charging status.► Holders for the power and charging cables, to keep them off the floor and protected.► Easy insertion and removal of the battery charger itself, perfect for those who frequently take the charger on the go!► Easy installation, with three mounting holes to mount the holder to either wood or drywall. Designed for #8 flathead screws, you can use either flathead wood screws, or flathead drywall screws with anchors. SCREWS NOT INCLUDED, but readily available at any hardware store (Ace, Home Depot, Lowes, etc.).► Made with durable, heat, and UV resistant PETG plastic. ⚠️⚠️⚠️ PLEASE NOTE: BATTERY CHARGER NOT INCLUDED! This is the wall mount only. ⚠️⚠️⚠️ 📬FREE DOMESTIC SHIPPING WITHIN THE USA!📬 Thank you for viewing my listing! 😊
julio 30, 2026
Are you tired of your charger falling off your table while in use? Do you worry about accidentally damaging it by having it on the floor? Keep it safe and protected by hanging it on your wall today! This product is designed to securely hold the D-POWER Battery Charger (Model DPLC110V55), with the following dimensions:📐 Length: 3.365 in.📐 Width: 1.85 in.📐 Height: 6.5 in. ❗️❗️❗️ There is more than one type of D-POWER charger with the same Model Number. One says D-POWER on the front of the charger with white letters, the other one is not labeled at all on the front and is bigger. This wall mount is for the charger NOT labeled in the front with white letters, with the size dimensions listed above.❗️❗️❗️ Please ensure that your charger matches this model number and looks similar to the charger in the photos, as compatibility cannot be guaranteed for other chargers. This should fit the D-POWER battery chargers for the following eBike brands and models:✔ Lectric XP, 1,0, 2.0, and 3.0 models✔ Lectric XP Step-Thru, 1,0, 2.0, and 3.0 models✔ Lectric XP Lite✔ Lectric XPremium✔ Lectric XP Trike✔ Lectric XPedition✔ Any eBike or battery that uses the D-POWER (UNLABELED in the front, with the dimensions listed above) (Model DPLC110V55) charger. FEATURES: ► Cutout for the charging status light, allowing you to easily check the charging status.► Holders for the power and charging cables, to keep them off the floor and protected.► Easy insertion and removal of the battery charger itself, perfect for those who frequently take the charger on the go!► Easy installation, with three mounting holes to mount the holder to either wood or drywall. Designed for #8 flathead screws, you can use either flathead wood screws, or flathead drywall screws with anchors. SCREWS NOT INCLUDED, but readily available at any hardware store (Ace, Home Depot, Lowes, etc.).► Made with durable, heat, and UV resistant PETG plastic. ⚠️⚠️⚠️ PLEASE NOTE: BATTERY CHARGER NOT INCLUDED! This is the wall mount only. ⚠️⚠️⚠️ 📬FREE DOMESTIC SHIPPING WITHIN THE USA!📬 Thank you for viewing my listing! 😊
julio 28, 2026
BTP Flat-Top Caps3D printed replacements for the hard-to-find Shimano shifter name plates/dust coversPrinted in PETG for toughness and heat-resistance, these covers replace several models of Shimano shifter covers that have the 1 screw mounting shown in the pics. Includes 1 pair of caps (2 total caps) 3 stainless-steel mounting screws (2 required but one included as an extra) ST-6510 1055510R600 Please message with any questions or if you have special color requests. Please note: No shifters are included.
julio 27, 2026
Compatible with Lectric XP 1.0, XP 2.0, XP 3.0, and XP4 folding models. MultiD Studio is an independent maker and is not affiliated with, endorsed by, or sponsored by Lectric eBikes. Lectric is a trademark of its respective owner, used here only to describe compatibility.
julio 27, 2026
Use this to attach Magene radars (Magene L508) to various saddle types: - Specialized SWAT (Power, Phenom, etc) - Bontrager Blendr (Aeolus, Verse, etc) - Selle Italia (Novus) - Pinarello Most Garmin mount insert and saddle mounting bolts (2x M5x16) are included. Ready to mount, no additional parts needed! 3D printed from black PETG. Don't overpay for basic 3D printed parts marketed by other vendors. Get the clean bike you're dreaming of for less.
julio 24, 2026
✔ Any eBike or battery that uses the SANS (LABELED in white letters on the front) (Model SSLC109V55M ) power adapter. ✔ Lectric XP, 1,0, 2.0, and 3.0 models. ✔ Lectric XP Step-Thru, 1,0, 2.0, and 3.0 models.