Brushless Motor Tester Ebike Testing Device Electric Hall Tester Detector 24-72V
Specifications
| Return Shipping Will Be Paid By | Buyer |
| All Returns Accepted | Returns Accepted |
| Item Must Be Returned Within | 60 Days |
| Brand | Unbranded |
| Part Type | Ebike Testing Device |
| MPN | Does not apply |
| UPC | Does not apply |
| EAN | Does not apply |
| Marke | Markenlos |
Visit storeItems for saleAbout usProduct DetailsFeatures:1. rapid detection of brushless motors good or bad and motor hall phase sequence motor winding2. Quickly detect the motor and controller phase angle of 60 degrees or 120 degrees3. Quickly detect the controller's good or bad.4. Brushless motor and controller fast wiring.5.Quickly detect the good or bad of the rotary brake handle. Product parameters and analysis:Note:Only need to turn on the power when using Hall detection and turn brake handle detection. Please replace the battery when the signal light is not bright enough.1.Motor Coil Detection: Connect the three clamps on the motor coil end of the detector to the three thick wires of the motor and rotate the motor, the three signal lamps will flash in turn, which is normal. If which does not light up, the winding is faulty.2. Motor Hall detection: the detector on the motor Hall line end to the motor Hall line, slowly rotate the motor, the three signal lamps should be on and off change3. When the 60 ° signal light is lit, that the motor is 60 ° otherwise 120 °.4. Motor phase sequence detection: (1) Hall phase sequence (a) 60 ° motor (b) 120 ° motor, (2) winding phase sequenceThrough this step operation can complete the controller and motor winding and hall color line to line.5, turn the test: the tester on the turn the test end of the three clamps were connected to the turn the turn and turn the turn the turn, turn the signal light should be bright changes, otherwise, that is, there is a fault.6, controller detection: this instrument applies to a variety of brushless controller detection:Connect the Hall input of the controller to the Hall line end of the controller of the tester.The controller main line output to the detector controller main line terminal connected to the controller power supply, the detector on the 5V indicator should be lit such as not lit, indicating that the controller's 5V output is faulty; turn the turn on the detector to detect the controller's six signals should be lit in sequence (two signals for a group), if not lit or there are two groups of simultaneous flashing is a fault in the controller. Packaging and list:Tester *1 + manual *1Payment MethodShipping PolicyFeedbackPayment Method Payment must be received in 5 business days of auction closing. Please leave note for your special request (e.g. Colors or Size) when you pay the order. Any special request cannot be accepted after 24 hours of payment, because most of orders will be processed instantly and same day dispatched. Shipping Policy 1. We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand. 2. Orders will be processed instantly and dispatched within 1-3 business days except hoilday, so we do NOT accept any email/message note after you place orders. 3. All package need to wait 30 days,Please take care it.Less than 30 days,we can't take a refund.Feedback We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important to us. We request that you keep in touch with us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.On Jun 13, 2024 at 15:49:34 PDT, seller added the following information: