We are trying to satisfy 100% of our customers
Our bikes are 100% safe and eco-friendly
✕
biker4-shop-icon3
agosto 15, 2026

WSS – FOX U-Cup Seal 21.61×27.81×3.78 Fork Air Seal

WSS MPN: RSSP1218. One WSS RSSP1218 U-cup only. Dust wipers, scraper seal, O-rings, fluids and tools are not included. IMPORTANT: THIS DOES NOT FIT EVERY FOX 32, F100 OR F120. FOX’s legacy instructions orient the U-cup sealing lip toward the top of the piston and positive air chamber.
agosto 13, 2026

Basso 25.4? Vintage Fork Uncut

A fork before my time. No relation to Ivan Basso. I believe it is meant to be threaded. And is uncut. Shines up real nice.
agosto 13, 2026

RARE Eddy Mercx Team SC 700c Carbon Fiber 1-1/8″ Fork 248mm Steerer 43mm Rake

Standard rim caliper brake required. Straight 1-1/8" steerer tube.For 700c wheels, 43mm rake. fork, so YES the steerer has been cut. If this seems obvious to you, congratulations on being among the minority of cyclists who understand that forks are produced with very long steerers which are then cut down.
agosto 12, 2026

White Brothers Suspension Fork

Vintage 1990’s white brothers suspension fork 1 1/8” threadless Steerer is 180mm long V-brake compatible 100mm hub spacing This fork has been in storage for a decade +. It holds air fine and the compression lockout works well The stantions are in very good condition but the top plastic seal has damage (probably due to age- Look at the pics) and is weeping oil a bit. Based on the age and the top seals, I would say that a service is recommended Based on my measurements it’s 70mm +/- suspension travel
agosto 12, 2026

White Brothers Suspension Fork

Vintage 1990’s white brothers suspension fork 1 1/8” threadless Steerer is 180mm long V-brake compatible 100mm hub spacing This fork has been in storage for a decade +. It holds air fine and the compression lockout works well The stantions are in very good condition but the top plastic seal has damage (probably due to age- Look at the pics) and is weeping oil a bit. Based on the age and the top seals, I would say that a service is recommended Based on my measurements it’s 70mm +/- suspension travel