DIA-COMPE

julio 24, 2026

Publicado Por En julio 24, 2026

Diatech (Dia-Compe) Tech 99 GOLDFINGER bicycle brake lever RIGHT HAND for 1″

Brand new Diatech Tech 99 GOLDFINGER single finger brake lever for RIGHT HAND SIDE * COLOR: GOLD ANODIZED * This is a RIGHT HAND brake lever, typically used for the rear brake (in countries that drive on the right side of the road) * Drilled lever with single finger operation * Works with side pull, u-brake, and cantilever brakes. NOT recommended for V-brakes. * Full forged brake lever, including clamp body (most clamp bodies are cast, not forged). * For 25.4mm (1") handlebars, but includes 22.2mm (7/8") shim to be used with smaller bars. * Swing arm clamp for lever changes without removing grips. * If you want to change the barrel adjusters, they take M7 adjusters.

julio 24, 2026

Publicado Por En julio 24, 2026

Dia-Compe MX2 bicycle BMX LEFT HAND brake lever – WHITE

Dia-Compe MX2 bicycle BMX LH brake lever * Color: WHITE POWDERCOAT * Model: MX2 * LEFT HAND LEVER * Fits 7/8" diameter tubing handlebars * Two settings: Set to "V" for V-brakes or use "N" for normal, side pull caliper brakes (gives a longer reach) * Takes a M10 size threaded barrel adjuster (silver one included as shown - we have other colors available separately in our Brake Lever Small Parts category)

julio 24, 2026

Publicado Por En julio 24, 2026

Dia-Compe MX2 bicycle BMX LEFT HAND brake lever – PURPLE

Dia-Compe MX2 bicycle BMX LH brake lever - PURPLE ANODIZED * Color: PURPLE ANODIZED * Model: MX2 * LEFT HAND LEVER * Fits 7/8" diameter tubing handlebars * Two settings: Set to "V" for V-brakes or use "N" for normal, side pull caliper brakes (gives a longer reach) * Takes a M10 size threaded barrel adjuster (silver one included as shown - we have other colors available separately in our Brake Lever Small Parts category)

julio 24, 2026

Publicado Por En julio 24, 2026

Diatech (Dia-Compe) LH Tech 99 GOLDFINGER bicycle brake lever LEFT HAND for 1″

Brand new Diatech Tech 99 GOLDFINGER single finger brake lever for LEFT HAND SIDE * COLOR: GOLD ANODIZED * This is a LEFT HAND brake lever, typically used for the front brake (in countries that drive on the right side of the road) * Drilled lever with single finger operation * Works with side pull, u-brake, and cantilever brakes. NOT recommended for V-brakes. * Full forged brake lever, including clamp body (most clamp bodies are cast, not forged). * For 25.4mm (1") handlebars, but includes 22.2mm (7/8") shim to be used with smaller bars. * Swing arm clamp for lever changes without removing grips. * If you want to change the barrel adjusters, they take M7 adjusters.

julio 24, 2026

Publicado Por En julio 24, 2026

Dia-Compe MX2 bicycle BMX RIGHT HAND brake lever BRIGHT DIP BLUE

Dia-Compe MX2 bicycle BMX RH brake lever - BRIGHT DIP BLUE ANODIZED * Color: BRIGHT DIP BLUE ANODIZED (old school style anodizing that is sort of a turquoisey shade) * Model: MX2 * RIGHT HAND LEVER * Fits 7/8" diameter tubing handlebars * Two settings: Set to "V" for V-brakes or use "N" for normal, side pull caliper brakes (gives a longer reach) * Takes a M10 size threaded barrel adjuster (silver one included as shown - we have other colors available separately in our Brake Lever Smalls category)

julio 24, 2026

Publicado Por En julio 24, 2026

Dia-Compe MX2 bicycle BMX LEFT HAND brake lever – BLACK SILVER

Dia-Compe MX2 bicycle BMX LH brake lever - SILVER ANODIZED * Color: BLACK painted clamp / SILVER ANODIZED lever * Model: MX2 * LEFT HAND LEVER * Fits 7/8" diameter tubing handlebars * Two settings: Set to "V" for V-brakes or use "N" for normal, side pull caliper brakes (gives a longer reach) * Takes a M10 size threaded barrel adjuster (silver one included as shown - we have other colors available separately in our Brake Lever Small Parts category)

julio 24, 2026

Publicado Por En julio 24, 2026

Dia-Compe DOUBLE PULL Tech 77W RIGHT HAND brake lever BLACK SILVER

Brand new genuine Dia-Compe Tech 77W RIGHT HAND (RH) Brake Lever COLOR: BLACK BODY / SILVER LEVER This is a DOUBLE PULL lever. It allows for two popular applications: * For flatland/freestyle, use it with a gyro and run two cables directly to the gyro. This eliminates the weak "Y" cable design of most gyros. * For general use, apply both front and rear brakes with only this RH lever. Fits standard 7/8" (22.2mm) handlebars - has hinged mounts (so you don't have to remove your grips to install). If you want to change the barrel adjusters, they take M6 adjusters.

julio 24, 2026

Publicado Por En julio 24, 2026

Dia-Compe MX2 bicycle BMX LH and RH brake lever SET – SILVER

Dia-Compe MX2 bicycle BMX RH and LH brake lever SET - SILVER ANODIZED * Color: SILVER ANODIZED * Model: MX2 * SET: both RIGHT HAND LEVER and LEFT HAND LEVER included * Fits 7/8" diameter tubing handlebars * Two settings: Set to "V" for V-brakes or use "N" for normal, side pull caliper brakes (gives a longer reach). This means you can run this lever set with two V-brakes or two side pull caliper brakes or a V-brake in the back and side pull caliper in the front. * Takes a M10 size threaded barrel adjuster (silver one included as shown - we have other colors available separately in our Brake Lever Small Parts category)

julio 24, 2026

Publicado Por En julio 24, 2026

Dia-Compe MX2 bicycle BMX LEFT HAND brake lever – GOLD

Dia-Compe MX2 bicycle BMX LH brake lever - GOLD ANODIZED * Color: GOLD ANODIZED * Model: MX2 * LEFT HAND LEVER * Fits 7/8" diameter tubing handlebars * Two settings: Set to "V" for V-brakes or use "N" for normal, side pull caliper brakes (gives a longer reach) * Takes a M10 size threaded barrel adjuster (silver one included as shown - we have other colors available separately in our Brake Lever Small Parts category)

julio 24, 2026

Publicado Por En julio 24, 2026

Dia-Compe MX2 bicycle BMX RIGHT HAND brake lever – BLACK

Dia-Compe MX2 bicycle BMX RH brake lever - BLACK ANODIZED * Color: BLACK ANODIZED * Model: MX2 * RIGHT HAND LEVER * Fits 7/8" diameter tubing handlebars * Two settings: Set to "V" for V-brakes or use "N" for normal, side pull caliper brakes (gives a longer reach) * Takes a M10 size threaded barrel adjuster (silver one included as shown - we have other colors available separately in our Brake Lever Small Parts category)

julio 24, 2026

Publicado Por En julio 24, 2026

Dia-Compe DOUBLE PULL Tech 77W RIGHT HAND brake lever SILVER

Brand new genuine Dia-Compe Tech 77W RIGHT HAND (RH) Brake Lever COLOR: SILVER BODY / SILVER LEVER This is a DOUBLE PULL lever. It allows for two popular applications: * For flatland/freestyle, use it with a gyro and run two cables directly to the gyro. This eliminates the weak "Y" cable design of most gyros. * For general use, apply both front and rear brakes with only this RH lever. Fits standard 7/8" (22.2mm) handlebars - has hinged mounts (so you don't have to remove your grips to install). If you want to change the barrel adjusters, they take M6 adjusters.

julio 24, 2026

Publicado Por En julio 24, 2026

Dia-Compe DOUBLE PULL Tech 77W RIGHT HAND brake lever WHITE

Brand new genuine Dia-Compe Tech 77W RIGHT HAND (RH) Brake Lever COLOR: WHITE POWDERCOAT BODY / WHITE POWDERCOAT LEVER This is a DOUBLE PULL lever. It allows for two popular applications: * For flatland/freestyle, use it with a gyro and run two cables directly to the gyro. This eliminates the weak "Y" cable design of most gyros. * For general use, apply both front and rear brakes with only this RH lever. Fits standard 7/8" (22.2mm) handlebars - has hinged mounts (so you don't have to remove your grips to install). If you want to change the barrel adjusters, they take M6 adjusters.

Login